Kuwait's exchanger demand is dominated by three large refineries and the upstream gas and oil facilities that feed them. Much of it is sour service. We machine tube sheets to drawing with hardness and inspection requirements built into the quote, and ship to Shuaiba or Shuwaikh.
Updated 28 Oct 2026
Kuwaiti refineries, gas plants and their fabricators can source machined tube sheets from NPRO India. We work to the drawing and the owner's specification, including sour-service hardness limits, and ship to Shuaiba Port (closest to the refineries) or Shuwaikh.
Kuwait refines at Mina Al-Ahmadi, Mina Abdullah and the newer Al-Zour refinery. Each runs hundreds of shell-and-tube exchangers, and turnarounds create bursts of replacement tube sheet demand. Upstream, oil and gas gathering and processing adds coolers and gas exchangers.
Most of this is sour service. That means the material's hardness, and therefore its heat treatment and sometimes its welding, is limited by the sour service standard on the specification. A quote that ignores those limits isn't a real quote.
Shuaiba Port sits next to the refinery belt south of Kuwait City and is the practical choice for most refinery cargo.
| Refineries | Mina Al-Ahmadi, Mina Abdullah, Al-Zour |
| Ports | Shuaiba, Shuwaikh |
| Codes | ASME VIII, TEMA, API references |
| Sour service refs | NACE MR0103 / ISO 17945 (refining), MR0175 / ISO 15156 (production) |
| Certificates | EN 10204 3.1, hardness, PMI |
| Enquiries | +91 9594639793 · sales@nproindia.in |
| Unit | Typical exchanger | Grades often specified |
|---|---|---|
| Crude and vacuum distillation | Feed/product exchangers, coolers | Carbon steel, 316L clad or solid |
| Hydrotreating / hydrocracking | Feed/effluent exchangers | 321, 347, alloy steel |
| Amine and sour water | Coolers, reboilers | Duplex 2205, 316L within hardness limits |
| Alkylation (HF units) | Coolers and condensers | Monel 400 |
| Seawater cooling | Condensers | Titanium, CuNi, super duplex |
Grade selection is the refinery's materials engineering decision. We machine what's specified and flag anything inconsistent with the stated service.
Two standards come up. In refineries it's usually NACE MR0103 / ISO 17945; for oil and gas production it's NACE MR0175 / ISO 15156. Both limit hardness to resist sulphide stress cracking.
Which standard applies, the hardness limit for the grade, whether hardness testing is required on the tube sheet itself, and any welding on the sheet (for example a fixed sheet's shell weld or tube-to-tubesheet welds) that will need its own hardness control.
For clad tube sheets, the limits apply to the cladding that contacts the sour fluid. Say so on the drawing so it's tested where it matters.
Refinery turnarounds fix the date the sheet has to be on site. These are the steps that decide whether it's achievable; we confirm each one against your date before you order.
| Step | What decides the time |
|---|---|
| Drawing and specification review | Completeness of the drawing and owner specification |
| Material | Whether the grade and thickness are available, or need ordering from a mill |
| Inspection and test plan approval | How quickly your inspector approves the ITP |
| Machining | Number of holes, thickness and grade |
| Inspection and release | Witness points and any re-tests |
| Shipping to Shuaiba | Sailing schedule and customs clearance |
Yes. State the sour service standard (MR0103 or MR0175) and the hardness limit on the enquiry, and we confirm the material condition and hardness testing in the quote.
Shuaiba Port, which is next to the refinery area. Shuwaikh is the alternative for Kuwait City.
Yes, from the original drawing or a measured survey of the old sheet. Tell us the turnaround date and we'll say whether it's achievable before you place the order.
Send drawing, grade, sour service requirements, quantity and port via the enquiry form or to sales@nproindia.in.
Drawing, grade, sour service standard and hardness limit, quantity and port. We review it before quoting.
Get an Export Quote →