Domestic Market - India

Tube Sheets for Indian Plants
& Fabricators

For Indian buyers there's no export paperwork and no sea freight: tube sheets are machined in Mumbai and delivered by road. The questions that matter instead are which rules apply to your equipment, and whether the drawing is ready to cut.

Send Your Drawing for a Quote Buyer Questions ↓

Updated 28 Oct 2026

SUGAR EVAPORATOR Ø D · ROAD FROM MUMBAI TUBE PLATE · IBR / ASME
DOMESTIC SUPPLY - INDIA
DELIVERYRoad, from Mumbai
RULESIBR where applicable
CODESASME VIII · TEMA · IS
SECTORSPower · refinery · sugar
Indian Buyers

Who buys tube sheets within India

Short answer

Indian fabricators and plants can order tube sheets (often called tube plates in India) from NPRO India, machined to drawing in Mumbai and delivered by road. Tell us at enquiry if the equipment falls under IBR, so material and inspection are planned for it from the start.

Domestic orders come from heat exchanger and boiler fabricators across Maharashtra, Gujarat and the south, and directly from plants: power stations, refineries, fertilizer plants and sugar mills, which run a lot of evaporators and juice heaters.

In Indian workshops the part is as often called a tube plate as a tube sheet, and drilling is commonly bought as job work. We supply the finished, drilled sheet; for the sourcing side of the business see tube sheet manufacturer in India, and for drilling see CNC tube sheet drilling.

Being close also means you can visit or send an inspector to the works without international travel.

Also calledTube plate
DeliveryRoad freight from Mumbai
Rules that may applyIBR, ASME VIII, IS codes
Typical buyersFabricators, power, refinery, fertilizer, sugar
Export from IndiaJNPT, Mundra, Chennai if you re-export
Enquiries+91 9594639793 · sales@nproindia.in
Sugar Season

Plan around crushing

Month strip showing the typical Indian sugar crushing season from November to April and the off-season maintenance window from May to October
Fig. 1 — Order tube plates as the season ends, so material, drilling and inspection fit the off-season.
Which Rules Apply

IBR, ASME or IS: which applies to your tube sheet

The rules follow the equipment, not the tube sheet. Your design engineer confirms which apply; this is how it usually breaks down in Indian plants.

EquipmentUsual rulesWhat it means for the tube sheet
Boilers and boiler components (steam side)Indian Boiler Regulations (IBR)IBR material and inspection must be planned before material is bought
Process heat exchangersASME VIII or IS codes, TEMAStandard material certificates and dimensional records
Feedwater heaters and condensers in power plantsDepends on design and owner specificationConfirm with the designer whether any part is under IBR
Sugar evaporators and juice heatersOwner specification, IBR for steam-side parts where applicableOften stainless or brass tube plates; see below

IBR and the Boilers Act framework have been under revision. Your designer or the boiler inspectorate has the current position for your equipment.

Indian Industries

Where Indian tube sheets go

Sugar Season

Planning tube plates around the crushing season

Sugar mills have a hard deadline: crushing starts when the cane is ready, and the evaporators have to be back in service. Tube plate replacement is usually done in the off-season, which compresses a year's maintenance into a few months.

Order early

Send drawings or surveys of worn plates as soon as the season ends. That leaves time for material, drilling and inspection without a rush.

Material

Evaporator tube plates are commonly stainless steel such as 304 or 316L, or brass where the existing design uses it; see copper, brass and bronze. Match the tube material to avoid galvanic corrosion at the joint.

Grades and Products

Common grades on Indian drawings

Also: carbon steel, Monel 400 and the tube sheet guide.

Domestic Enquiry

What to send for a domestic tube plate quote

ItemNote
Drawing or survey of the old plateHole coordinates, diameters and grooves if there's no drawing
Grade and product formPlate or forging, solid or clad; IS or ASME designation
IBR yes or noDecides how material is bought and inspected
Third-party inspection (TPI) agencyIf your client nominates one, name it so hold points are agreed
Quantity and delivery siteRoad delivery from Mumbai; unloading arrangements for heavy plates
Required-by dateEspecially for sugar season and plant shutdowns

For drilling-only job work see CNC tube sheet drilling.

Power Plants

One plate, both tube ends

Schematic of a U-tube heat exchanger with a single tube plate and U-bent tubes
Fig. 2 — U-tube designs (common in feedwater heaters) use a single tube plate.

Feedwater heaters are often U-tube. Confirm with your designer whether the unit falls under IBR before ordering.

Delivery

Road delivery from Mumbai

Schematic of domestic road delivery from the Mumbai works to Gujarat, Pune, Nashik, southern India and northern refineries
Fig. 3 — Domestic orders go by road; no export paperwork.
FAQ

Questions Indian buyers ask

Tell us at enquiry stage if the equipment falls under IBR. IBR affects how the material is bought and inspected, so it has to be planned before material is ordered.

Yes. Tube plate is the common term in Indian workshops; tube sheet and tubesheet are the same part.

Yes. Domestic buyers often inspect at our works. Agree the inspection points when you place the order.

By road from Mumbai to your works or site. If you're re-exporting the equipment, we can also pack for export through JNPT, Mundra or Chennai.

Send drawing, grade, quantity and delivery location via the enquiry form, email sales@nproindia.in or call +91 9594639793.

Quote a Tube Sheet for an Indian Plant

Drawing or survey, grade, quantity, IBR yes/no and delivery location. We review it before quoting.

Get an Export Quote →