Malaysian exchanger demand runs from the big integrated refinery and petrochemical complex in Johor and the east-coast plants to Sarawak's LNG and a large palm oil refining and oleochemical sector. We machine tubesheets to drawing and ship to Port Klang, Tanjung Pelepas or Bintulu.
Updated 28 Oct 2026
Malaysian fabricators, EPCs and plants can source machined tubesheets from NPRO India for refinery, petrochemical, LNG and palm oil service. We machine to drawing, supply ASME/TEMA records, and ship to Port Klang, Tanjung Pelepas (for Johor) or Bintulu (for Sarawak).
In Johor, the Pengerang integrated complex brings refinery and petrochemical exchangers. On the east coast, Kertih and the Terengganu plants add more. In Sarawak, Bintulu's LNG complex has its own steady demand for gas processing and cooling exchangers.
Then there's palm oil: refineries and oleochemical plants run heaters, coolers and deodoriser exchangers, mostly in stainless steel, where food-grade cleanliness and corrosion from fatty acids matter.
Malaysian engineers usually write tubesheet as one word, so that's what this page uses.
| Industrial hubs | Pengerang (Johor), Kertih, Bintulu |
| Ports | Port Klang, Tanjung Pelepas, Bintulu |
| Codes | ASME VIII, TEMA |
| Local approval | DOSH, handled by the fabricator / owner |
| Typical grades | 316L, duplex, titanium, CuNi |
| Enquiries | +91 9594639793 · sales@nproindia.in |
| Port | Serves | Typical tubesheet destination |
|---|---|---|
| Port Klang | Klang Valley and central peninsula | Fabricators and plants around Selangor |
| Tanjung Pelepas | Southern Johor | Pengerang complex and Johor fabricators |
| Bintulu | Sarawak | LNG and gas processing plants |
Your forwarder may prefer another port; we ship wherever is nominated.
Process exchangers in stainless, duplex and nickel alloys; turnaround replacements at older plants.
Coolers and gas exchangers, some in sour service, plus seawater cooling.
Stainless heaters and coolers where product purity and fatty-acid corrosion set the grade.
See 316 vs 316L, the tube count calculator and the tubesheet guide.
Palm oil refining and oleochemicals use a lot of heat exchange: oil heaters and coolers, economisers that recover heat from deodorised oil, and fatty acid and glycerine exchangers in oleochemical plants. Most of these are stainless steel.
Grade choice depends on temperature and on free fatty acid content. Hot fatty acids are more aggressive than refined oil, which is why 316L is often preferred over 304 in the hotter parts of the process.
Surface finish matters on the product side, both for cleaning and to avoid product build-up. Put the required finish on the drawing.
Plate heat exchangers are common in this industry too; our sheets are for the shell-and-tube units. See food processing for other food-grade service.
| Item | Note |
|---|---|
| Drawing and revision | Or a survey of the old sheet for replacements |
| Grade and product side | Especially for palm oil and food service |
| Tube OD, pitch and joint | Expanded, welded or both |
| Inspection | PMI, UT, third-party witness if required |
| Quantity and port | Port Klang, Tanjung Pelepas or Bintulu |
Tanjung Pelepas is usually closest for southern Johor. Your forwarder confirms the best route.
The exchanger fabricator or plant owner. We supply the tubesheet with the material and inspection records they need.
Send drawing, grade, quantity and port via the enquiry form or to sales@nproindia.in.
Drawing, grade, quantity and port (Klang, Pelepas or Bintulu). We review it before quoting.
Get an Export Quote →