Custom drilled tubesheets machined in Mumbai to your drawing and shipped to Houston, Los Angeles or NY/NJ. We quote against the ASME material spec and TEMA class on the print, and flag drawing gaps before we put a price on it.
Updated 28 Oct 2026
Yes, you can buy custom tubesheets from India for a US exchanger. NPRO India machines them to your drawing in Mumbai, quotes against the ASME SA/SB material spec and TEMA class on the print, and ships crated to Houston, Los Angeles or NY/NJ. Code stamping of the finished exchanger stays with your shop.
Most US enquiries come from three places: heat exchanger fabricators building new shell-and-tube units, refinery and chemical plant maintenance teams replacing a tubesheet during a retube or turnaround, and power plant buyers sourcing condenser and feedwater heater sheets.
The reason they look overseas is rarely plain carbon steel. It's usually the expensive end of the grade list: Hastelloy C276, Monel 400, duplex 2205, titanium or copper-nickel, where the plate and machining cost dominates and a drawing-led supplier can compete with domestic shops.
US prints call the part a tubesheet (one word), and so do we on this page. Everything here assumes you send a drawing; we don't sell from a catalogue of standard sizes.
| What US drawings call it | Tubesheet |
| Design code context | ASME BPVC Sec. VIII Div. 1 (Part UHX) |
| Layout and tolerances | TEMA classes R / C / B |
| Typical plate specs | SA-516-70, SA-240, SB-575, SB-127, SB-265 |
| Gateways | Houston, Los Angeles, NY / NJ |
| Enquiries | +91 9594639793 · sales@nproindia.in |
In a floating head unit (TEMA types such as AES or AET) the stationary tubesheet takes the bolt load between shell and channel, while the floating tubesheet travels as the tubes expand. Replacement orders usually concern one of the two, so tell us which.
See floating tube sheets and fixed tube sheets.
A lot of US work is replacement, not new build. When a sheet is eroded at the tube ends, cracked at a ligament or corroded past its allowance, the fastest path is a replacement machined to the original data. This is what lets us quote it without a round of questions.
| What to send | Why we need it |
|---|---|
| Original drawing or the ASME data report (Form U-1A) reference | Fixes the design pressure, material and thickness the sheet was built to |
| Measured hole map if no drawing survives | We machine to coordinates, not guesses; a field survey of the old sheet is fine |
| Tube OD and BWG gauge | Sets the tube hole diameter and tolerance band under TEMA |
| Groove count and dimensions | Expanded joints need the grooves to match your rolling procedure |
| Pass partition grooves and gasket face finish | Mismatched partition grooves are the most common fit-up problem on replacements |
| Weld prep or tongue details (fixed sheets) | Fixed sheets are welded to the shell; the prep has to match your shell |
Shell-side and channel-side faces are machined to the finish on your drawing. If the drawing is silent, we ask rather than assume.
Your design engineer owns the tubesheet thickness calculation, usually under ASME Section VIII Division 1 Part UHX. We don't redo your design. We check that what's drawn can be machined and will pass the inspection you've specified.
We confirm the minimum ligament at your tube OD, pitch and drilling depth, because deep holes in thick sheets drift. Use the pitch calculator or the tube hole layout tool for a first check.
Class R, C or B changes the tube hole tolerances and groove requirements. Our TEMA tolerance reference summarises what each class asks for. If the print doesn't say which class, we ask.
The tubesheet is a part. The shop that builds and stamps the exchanger stays the code certificate holder; we supply the machined part with its material and inspection records.
| Grade | Plate spec on US drawings | Where it usually goes |
|---|---|---|
| 316L stainless | SA-240 316L | Refinery and chemical exchangers, general corrosion service |
| Duplex 2205 | SA-240 UNS S32205 | Brackish cooling water, chloride-bearing process streams |
| Hastelloy C276 | SB-575 UNS N10276 | Acid service where stainless and duplex pit |
| Monel 400 | SB-127 UNS N04400 | HF alkylation units, seawater |
| Inconel 625 | SB-443 UNS N06625 | High-temperature and severe corrosive duty |
| Titanium Grade 2 | SB-265 UNS R50400 | Seawater-cooled condensers |
| Copper-nickel 90/10 | SB-171 UNS C70600 | Condensers and coolers on seawater or brackish water |
Clad construction (for example carbon steel with a stainless or nickel-alloy face) is quoted against the clad spec on your drawing, such as SA-264 or SA-265. See clad tube sheets and all 22 grades.
Start from the tube sheet guide if you need the basics first, or compare fixed, floating and U-tube designs.
Sheets travel by ocean freight in export crates, with machined faces protected. Houston is the usual gateway for Gulf Coast refineries and fabricators; Los Angeles and NY/NJ cover the coasts. Inland delivery is arranged by your forwarder or quoted as DAP if you ask.
Duties are worth checking early. US duties on steel and steel products have changed several times recently. Your customs broker should confirm the HTS classification and duty before the PO, because it can move the landed cost more than the freight does.
Before you order, it helps to read ten questions to ask before your first order and common RFQ mistakes.
Each item in the replacement table above maps to a feature in this section: hole size and grooves set the expanded joint, the ligament sets the strength, and the pass partition groove decides whether the channel still seals.
Yes, if the old sheet can be measured. Send a hole map with coordinates, tube OD and gauge, groove details and the original design data if you have it. We machine to measured coordinates and raise anything that doesn't add up before quoting.
Yes. Drawings in inch or metric units are both fine. Give us tube OD and BWG gauge and the TEMA class, and we size the tube holes and tolerances from those.
Yes. Hastelloy C276 and Monel 400 are among the grades we machine. Tell us the SB spec on your drawing and the mill certificate type you need, and we confirm material availability with the quote.
The shop that builds and stamps the exchanger. We supply the machined tubesheet with material certificates and the dimensional and NDT records your drawing calls for.
Send the drawing (PDF, DWG or STEP), grade, quantity and delivery point through the enquiry form or to sales@nproindia.in. We review it and come back with questions or a quote.
Drawing, grade, quantity, TEMA class and delivery point. We check it can be machined before we quote.
Get an Export Quote →