Live Tool

Tube Hole Layout Calculator

Drag the sliders to see the actual hole pattern update in real time — same engine behind the animation on the homepage, now driven by your numbers instead of a demo.

Inputs

—
TUBE COUNT
—
PITCH (MM)
—
LIGAMENT EFF.

Estimate for layout visualisation only — final tube count and TEMA minimum-pitch compliance should be confirmed by NPRO India engineering against your governing code.

TRIANGULAR PITCH — HOVER TO PULSE
Design notes

Tube hole design for roller expansion

Answer first: This calculator visualises pitch, pattern, ligament efficiency, and approximate tube count. Hole diameter for rolling, groove notes, and rolling depth must still follow the purchaser drawing and the current TEMA edition — the tool does not approve a joint.

Rolled tube joint with grooved hole schematic ROLLED JOINT · GROOVED HOLE (SCHEMATIC) TUBE SHEET Tube OD 1. Hole clearance over tube OD 2. Optional grooves for rolling bite 3. Rolling depth ≤ typical design limits 4. Ligament must survive expansion General practice illustration — freeze numbers on the drawing / TEMA edition / purchaser spec.
FIG. Expanded (rolled) tube-to-tubesheet joint with optional grooves

How to read pitch, ligament & tube count

Pitch ratio (p/d) and pattern (triangular 30° vs square 90°) drive tube count and ligament efficiency in the live SVG. Use the result to sanity-check a proposed layout, then confirm TEMA minimum pitch and ligament rules with engineering. Companion tools: TEMA pitch calculator, pitch layout reference, all calculators.

Hole diameter vs tube OD for expanded joints

Roller expansion needs a controlled diametral clearance between the drilled hole and the tube OD. TEMA publishes hole oversize guidance that often varies with unsupported tube length and class practice — commonly discussed bands include on the order of ~0.4 mm to ~0.8 mm oversize depending on the clause and duty. Treat those figures as orientation only: freeze the hole diameter on the drawing against the current TEMA edition and purchaser specification. Related: tolerances explained, TEMA tolerance reference, TEMA Class R vs C vs B.

Grooves for rolling

Many roller-expansion specifications call for one or more annular grooves in the hole bore so expanded tube metal can flow into the groove and improve pull-out resistance / seal. Groove width, depth, and count are purchaser-standard details (and sometimes TEMA/API notes) — not shop improvisation. Full joint discussion: expanded vs welded and tube hole design for rolling.

Rolling depth — general industry practice

A widely cited design-standard practice limits rolling length to about the lesser of ~90% of tubesheet thickness or 150 mm, unless the purchaser specifies otherwise. Label this as general practice used across many published design notes — not an NPRO proprietary guarantee. Record wall reduction / torque per the ITP.

Ligament risk on tight triangular pitch

Triangular patterns pack more tubes but leave less metal between holes. Aggressive rolling on a tight ligament can yield the bridge, ovalise holes, or start cracks — problems that later appear as damaged tube sheet holes. If ligament efficiency from this tool looks marginal, stop and re-validate pitch before CNC drilling.

Send the drawing for manufacturability review

NPRO India CNC-drills tube sheets to the frozen hole map. Share OD, thickness, tube OD/pitch/pattern, hole diameter, joint method, and TEMA class via the enquiry form — or WhatsApp / phone from the contact bar.

FAQ — tube hole layout & rolling

What is tube hole clearance for roller expansion?

It is the diametral oversize of the drilled hole relative to tube OD that allows the expander to seat the tube. Use TEMA edition + drawing values — not a webpage estimate — as the purchase requirement.

Do tube holes need grooves for rolling?

Only when the purchaser specification or governing standard calls for them. Groove geometry is a design detail; do not add or omit grooves in the shop without approval.

How deep should tubes be rolled into the tube sheet?

Many design standards use a rolling length near the lesser of ~90% of tubesheet thickness or 150 mm, unless specified otherwise. Confirm on the ITP and drawing.

Triangular vs square pitch for expandability / cleaning?

Triangular packs more tubes; square often eases mechanical cleaning lanes. Both can be expanded if clearance, ligament, and procedure are correct.

Does this calculator replace TEMA / engineer approval?

No. It is a visualisation aid for pitch, count, and ligament efficiency. Final hole design requires the drawing, TEMA/ASME context, and engineering sign-off.